Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 2

Filters

Stacked

Scrolling

Showing

of 2

Mfr Part #	Quantity Available	Price	Series	Package	Product Status	Output Configuration	Output Type	Number of Regulators	Voltage - Input (Max)	Voltage - Output (Min/Fixed)	Voltage - Output (Max)	Voltage Dropout (Max)	Current - Output	Current - Quiescent (Iq)	Current - Supply (Max)	PSRR	Control Features	Protection Features	Operating Temperature	Mounting Type	Package / Case	Supplier Device Package

LT3045IMSE#PBF IC REG LIN POS PROG 500MA 12MSOP Analog Devices Inc.	7,741 In Stock	1 : ¥76.76000 Tube	-	Tube	Active	Positive	Adjustable	1	20V	0V	15V	0.45V @ 500mA	500mA	20 µA	25 mA	117dB ~ 53dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Reverse Polarity, Under Voltage Lockout (UVLO)	-40°C ~ 125°C (TJ)	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP
LT3094IMSE#PBF IC REG LIN NEG ADJ 500MA 12MSOP Analog Devices Inc.	665 In Stock	1 : ¥76.76000 Tube	-	Tube	Active	Negative	Adjustable	1	-2.3V	-19.5V	0V	0.41V @ 500mA	500mA	2.35 mA	23 mA	108dB ~ 28dB (120Hz ~ 10MHz)	Enable, Power Good, Soft Start	Over Current, Over Temperature, Short Circuit, Under Voltage Lockout (UVLO)	-40°C ~ 125°C	Surface Mount	12-TSSOP (0.118", 3.00mm Width) Exposed Pad	12-MSOP-EP

Showing

of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.