Simple GPS Tracker

2020-04-01 | By M5Stack

License: General Public License

* Thanks for the source code and project information provided by @Ptschulik

When I received the M5Stack together with the M5 Stack GPS module I wanted to generate a simple display to show actual GPS data. It was the perfect opportunity to find out how to use the graphic display, the buttons and the Arduino library TinyGPS++.

So, what this project offers:

Display of the parameters lateral and longitudinal location, altitude, speed, number of actual received satellites, HDOP value and time and date.
With the right button you can switch between German and English language.
With the middle button you can change between the format of the lateral and longitudinal location from decimal degree to degree, minutes and seconds and back.
With the left button you can change the brightness of the display.
Especially care is given to update the display only when necessary to avoid flicker of the display.
Also, a huge effort was spent to determine if the GPS is receiver is not attached or if no valid GPS data is detected.
The code is commented very well so changes to your needs should be straight forward and fairly easy.

Enjoy the project!

Add all DigiKey Parts to Cart

Have questions or comments? Continue the conversation on TechForum, DigiKey's online community and technical resource.

Visit TechForum

Arduino | 3D Printing | Raspberry Pi

Simple GPS Tracker

2020-04-01 | By M5Stack

信息

帮助

联系我们

关注我们