3D Printed Jack-O-Mojis

2024-10-17 | By Lulzbot

License: See Original Project 3D Printing Filament

Courtesy of LulzBot

Guide by LulzBot

Grab your favorite black cat, your trusty broken mirror, and join us on the 13th floor. ‎Let's do some 3D printing crafts and 3D print our own jack-o-mojis!‎

Items Needed

• Pumpkin or similar decorative squash.‎

• ‎3D printer‎

• Filament (we used ABS, PLA, and INOVA-1800)‎

• Pumpkin carving knife

• Freely licensed emoji (see below)‎

‎3D Print, Assemble, and Smile‎

1. ‎‎3D print your emoji pumpkin decorations.‎

2. Hollow out your desired gourd. Save the seeds for roasting later.‎

3. Position the 3D-printed decorations and gently push against the gourd to mark the ‎mounting location.‎

4. Score the pumpskin or cut a hole slightly smaller than the mounting peg.‎

5. Firmly push each piece into position.‎

6. Place strategically to help keep frowns and bad luck at bay.‎

‎

Smiling Sunglasses

‎ ‎

Glasses_CoolGuy.stl

Smile.stl

Source

Tears Of Joy

‎ ‎

Squinted_Eyes.stl

Teardrops.stl

Teeth.stl

Source

Smiling Heart Eyes

‎ ‎

Heart_Eyes.stl

Source

Nerd Face

‎ ‎

Glasses_Nerd.stl

Open_Eyes.stl

Open_Eyes_Pupil.stl

Tooth.stl

Source

Tongue

‎ ‎

Open_Eyes.stl

Open_Eyes_Pupil.stl

Tongue.stl

Wink.stl

Source

Have questions or comments? Continue the conversation on TechForum, DigiKey's online community and technical resource.

Visit TechForum

Arduino | 3D Printing | Raspberry Pi