DC1084A-B: 0.6 ~ 5V @ 6A, 5 ~ 28V in
Summary
Demonstration circuit DC1084A-B features the LTM®4602HV, the high efficiency, high density step-down μModule® regulator. The input voltage range is from 4.5V to 28V.
The output voltage is jumper programmable from 0.6V to 5V, refer to the step-down ratio curve in the LTM4602HV data sheet. The rated load current is 6A, while derating is necessary for certain VIN, VOUT and thermal conditions.
The output voltage is jumper programmable from 0.6V to 5V, refer to the step-down ratio curve in the LTM4602HV data sheet. The rated load current is 6A, while derating is necessary for certain VIN, VOUT and thermal conditions.
Specifications
| Manufacturer | Analog Devices Inc. |
|---|---|
| Category | AC/DC and DC/DC Conversion |
| Sub-Category | DC/DC SMPS - Single Output |
| Eval Board Part Number | DC1084A-B-ND |
| Eval Board Supplier | Analog Devices Inc. |
| Eval Board |
Board not Stocked
|
| Topology |
Step Down
|
| Outputs and Type |
1 Non-Isolated
|
| Voltage Out: Factory Set |
0.6 V
1.2 V 1.5 V 1.8 V 2.5 V 3.3 V 5 V |
| Current Out |
6 A
|
| Voltage In |
5 ~ 28 V
|
| Efficiency @ Conditions |
>80%, 20V in, 5V @ 1.5 ~ 5 A
>80%, 20V in, 3.3V @ 2 ~ 5 A >79%, 24V in, 5V @ 1.5 ~ 5 A >78%, 24V in, 3.3V @ 1.7 ~ 5 A >72%, 20V in, 1.5V @ 1.2 ~ 5 A >67%, 24V in, 1.5V @ 1.5 ~ 5 A |
| Voltage Out Range |
0.6 ~ 5 V
|
| Features |
Internal Inductor
Over Voltage Protection Power Good Output Shutdown, Enable, Standby Soft Start |
| Switching Frequency |
800 kHz
|
| Standby Current [Typical] |
50 µA
|
| Quiescent Current [Typical] |
1.2 mA
|
| Component Count + Extras |
9 + 16
|
| Internal Switch |
Yes
|
| Design Author |
Linear Technology
|
| Application / Target Market |
Point of Load (PoL)
Servers Telecom |
| Standby Current [Maximum] |
100 µA
|
| Quiescent Current [Maximum] |
42 mA
|
| Main I.C. Base Part |
LTM4602HV
|
| Date Created By Author | 2006-10 |
| Date Added To Library | 2012-03 |
