MAX15046BEVKIT+: 3.3V @ 10A, 5 ~ 40V in
Summary
The MAX15046B evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary to evaluate the performance of the MAX15046B 10A synchronous step-down controller. The MAX15046 IC is available in a small 16-pin QSOP package with an exposed pad.
The MAX15046B EV kit requires a 5V to 40V input voltage range power supply that provides up to 7A for normal operation. The MAX15046B EV kit output is configured to 3.3V and delivers up to 10A output current. The controller’s switching frequency is programmed to 350 kHz. The MAX15046B EV kit includes PCB pads to enable the circuit and to monitor the power-good output.
The MAX15046B EV kit requires a 5V to 40V input voltage range power supply that provides up to 7A for normal operation. The MAX15046B EV kit output is configured to 3.3V and delivers up to 10A output current. The controller’s switching frequency is programmed to 350 kHz. The MAX15046B EV kit includes PCB pads to enable the circuit and to monitor the power-good output.
Specifications
| Manufacturer | Analog Devices Inc./Maxim Integrated |
|---|---|
| Category | AC/DC and DC/DC Conversion |
| Sub-Category | DC/DC SMPS - Single Output |
| Eval Board Part Number | MAX15046BEVKIT+-ND |
| Eval Board Supplier | Analog Devices Inc./Maxim Integrated |
| Eval Board |
Normally In Stock
|
| Topology |
Step Down
|
| Outputs and Type |
1 Non-Isolated
|
| Voltage Out: Factory Set |
3.3 V
|
| Current Out |
10 A
|
| Voltage In |
5 ~ 40 V
|
| Efficiency @ Conditions |
>90%, 24V in, 5V @ 3.2 ~ 13 A
>90%, 12V in, 5V @ 2.7 ~ 13.5 A >90%, 12V in, 3.3V @ 2.8 ~ 11 A >85%, 24V in, 3.3V @ 3 ~ 13 A >80%, 24V in, 1.8V @ 3 ~ 15 A >80%, 12V in, 1.8V @ 2.5 ~ 15 A >80%, 12V in, 1.2V @ 2.5 ~ 12 A >75%, 24V in, 1.2V @ 4.5 ~ 13 A |
| Voltage Out Range |
0.6 ~ 85% Vin
|
| Features |
Current Limit (Adj. or Fixed)
Over Current Protection Power Good Output Pre-Biased Startup Short Circuit Protection Shutdown, Enable, Standby Soft Start Thermal Protection |
| Switching Frequency |
100 kHz ~ 1 MHz
|
| Standby Current [Typical] |
350 µA
|
| Quiescent Current [Typical] |
2 mA
|
| Component Count + Extras |
36 + 14
|
| Internal Switch |
No
|
| Design Author |
Maxim Integrated Products
|
| Application / Target Market |
Computers
Power: Auxiliary Power Supply Power: Industrial Power Telecom |
| Standby Current [Maximum] |
550 µA
|
| Quiescent Current [Maximum] |
3 mA
|
| Main I.C. Base Part |
MAX15046B
|
| Date Created By Author | 2009-08 |
| Date Added To Library | 2014-02 |
