Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Results: 2
Packaging
Cut Tape (CT)Tape & Reel (TR)Tube
Product Status
ActiveObsolete
Output Type
AdjustableFixed
Voltage - Input (Max)
30V40V
Voltage - Output (Min/Fixed)
1.24V5V
Voltage - Output (Max)
32V-
Voltage Dropout (Max)
0.6V @ 100mA-
Current - Output
100mA5A
PSRR
75dB ~ 60dB (120Hz)-
Protection Features
Over Current, Over TemperatureOver Temperature, Short Circuit
Operating Temperature
-40°C ~ 125°C (TJ)0°C ~ 125°C
Package / Case
TO-220-3TO-226-3, TO-92-3 (TO-226AA) Formed Leads
Supplier Device Package
TO-220-3TO-92-3
Stocking Options
Environmental Options
Media
Marketplace Product
2Results
Showing
of 2
Compare
Mfr Part #
Quantity Available
Price
Series
Package
Product Status
Output Configuration
Output Type
Number of Regulators
Voltage - Input (Max)
Voltage - Output (Min/Fixed)
Voltage - Output (Max)
Voltage Dropout (Max)
Current - Output
Current - Quiescent (Iq)
Current - Supply (Max)
PSRR
Control Features
Protection Features
Operating Temperature
Mounting Type
Package / Case
Supplier Device Package
TO-92-3(StandardBody),TO-226_bentlead
LP2950-50LPRE3
IC REG LINEAR 5V 100MA TO92-3
Texas Instruments
13,955
In Stock
1 : ¥3.86000
Cut Tape (CT)
2,000 : ¥1.37523
Tape & Reel (TR)
-
Tape & Reel (TR)
Cut Tape (CT)
Active
Positive
Fixed
1
30V
5V
-
0.6V @ 100mA
100mA
120 µA
14 mA
-
-
Over Current, Over Temperature
-40°C ~ 125°C (TJ)
Through Hole
TO-226-3, TO-92-3 (TO-226AA) Formed Leads
TO-92-3
TO-220-3
LM338T
IC REG LINEAR POS ADJ 5A TO220-3
Texas Instruments
314
In Stock
1 : ¥24.14000
Tube
-
Tube
Obsolete
Positive
Adjustable
1
40V
1.24V
32V
-
5A
-
-
75dB ~ 60dB (120Hz)
-
Over Temperature, Short Circuit
0°C ~ 125°C
Through Hole
TO-220-3
TO-220-3
Showing
of 2

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Linear voltage regulators, including LDO (Low Drop Out) types, are used to provide a stable output voltage that is nominally invariant with respect to changes in load current, input voltage, or environmental factors. Their operating principle requires that the input voltage be maintained above the desired output voltage by some minimum amount, and function on the basis of converting whatever excess voltage is present at the input to heat. While this renders them less efficient than switch-mode voltage regulators for most applications, they are often better suited for applications with high sensitivity to noise.