Allegro's racing to meet the challenges of electrification application note.
This application note will describe the use of the new highcurrent ACS772 Hall-effect current sensor integrated circuit (IC) from Allegro MicroSystems and will give an overview of its features and improvements from previous Allegro high-current sensors.
This application note describes the use of the ALS31300 and ALS31313 3D linear Hall-effect sensor integrated circuits (IC) from Allegro MicroSystems
This application note describes the use of the new highly isolated, high bandwidth ACS733 Hall-effect current sensor integrated circuit (IC) from Allegro MicroSystems.
This report outlines hot-swap test results for A5977 and A5979 stepper motor drivers.
With the proliferation of human interface devices, there is a growing need for robust, non-contact sensing solutions that are low cost, low power, and low form factor
This document explains how to implement a 2D or 3D magnetic sensor to obtain a joystick with a well-defined behavior.
This application note describes multiple methods for measuring and characterizing system bandwidth, with a focus on the impulse response method.
A concentrator focuses magnetic flux lines, which are generated by electrical current flowing through a conductor, at the center of the air gap, where the Hall-effect magnetic sensor IC is positioned.