Product Training Library

The MORN series is available from Vishay as a matched four resistor network

AEC automotive qualified precision chip resistor that exhibits a low TCR of 25ppm/ºC and is available in tolerances as low as 0.1%.

MPMA series precision thin film automotive qualified matched pair resistor divider network offers various advantages over discreet chips including superior ratio tolerance.

Constructed using Self Passivating Tantalum Nitride resistive film on a ceramic substrate and is suitable for harsh automotive applications.

Save board space, decrease noise elements, and improved ratio stability by implementing the MPM series into applications needed resistance or voltage matching.

Tight tracking and ratio tolerances and great ratio stability for all surface mount applications. Easy selection for applications with matched resistor elements.

When compared to discrete components, NOMCs use less board space, close ratio tolerances, are ratio stable, and use very low noise elements.

Provide ratio stability over time and temperature. Ideal for differential amplifier applications requiring precision gain control or low common mode rejection.

PNM series chip resistors have been carefully engineered with non magnetic materials to eliminate the effects of stray magnetic fields on circuit performance.

Offer small form factor and exceptional stability for a variety of applications requiring integrated elements for common digital terminating circuits.

Small case size, side landing pads, and standard edge trimming allow the FC series to perform at frequencies above 100MHz with minimal resistance roll-off.

The ORNV resistor networks have excellent ratio stability and use very low noise elements which make them ideal for low noise signal response applications.

PLTT's high accuracy features make it useful in the oil and gas exploration industries where high temperatures and critical data measurements are used.

Tight TCR and tolerance paired with exceptional stability allow the PHP series to be highly stable with a low shift when used at 2000 hours at 70C.

Moisture resistance, good ESD ratings, excellent stability, and low noise levels allow PAT series to be well suited for battery management circuit applications.