Slide 1
Slide 2
Slide 3
Slide 4
Slide 5
Slide 6
Slide 7
Slide 8
Slide 9
Slide 10
Slide 11
Slide 12
Slide 13
Slide 14
Slide 15
Slide 16
Slide 17
Slide 18
Slide 19
Slide 20
Slide 21
Slide 22
Slide 23
Slide 24
Slide 25
Slide 26
Slide 27
Slide 28
Slide 29
Slide 30
Slide 31
Product List
The DPI GUI allows communication to up to 4 POLs and 2 BUS converters. Enter the trim resistor value in Kohms at the top and select the Trim value in Volts. Then select “Write Settings” for the module to accept the new setting. If this is to become the new permanent setting of the module, select “Store Defaults”. That’s it. The digital trim is capable of 0.4% resolution.
PTM Published on: 2012-07-02